Feuling Vented Dipstick for 2017 - UP HD Touring Models - Black
Billet dipsticks vent/breathe excessive crank case pressure from the oil tank through a PVC style breather consisting of an oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
Screws into the factory oil fill spout as a stock replacement part
These breathing dipsticks remove unwanted build-up of blow by pressure, all internal combustion engines have a certain amount of blow by
Larger cubic inch, worn and or loose ring clearance as well as engines pushed to their limits generally have increased blow by
Blow by is pressure that is forced past the rings and cylinders, pushed into the crankcase and then forced back into the oil tank
Dipsticks help remove this unwanted pressure through a (CVS) Crankcase Ventilation System
Feuling test results show a decrease in engine oil sump levels, more freely/smoother revving engine, increased MPG and decreased blow-by
Dipsticks vent/breath excessive crank case pressure from the oil tank through a breather system consisting of a oil separator system, perforated disc, replaceable filter element and umbrella flapper valve
Includes two venting styles options to choose from when installing the dipstick
Option 1: 1/8" NPT breather vent fitting with internal porous filter element (this option gives a clean look, however it can produce an oil misting/residue out of the element on engines with excessive leakdown/blow by)
Option 2: Quick-disconnect coupler fitting with rubber hose and filter element (this option will run any excessive oil misting/residue through the line and into the filter element, however this option does requires disconnecting the fitting in order to check the oil
Option 2 is Feuling's preferred option as it breaths more than Option 1
For Option 2, Feuling recommends routing the line up the frame rail, up under the seat/abs area then back down along the right side frame rail and the filter element can fit cleanly between the engine/trans matting area on the inside of the lower right frame rail
Checking oil level: There are two ways to read the oil level with this dipstick, with the bike on the jiffy stand (FHS) or the bike upright and level (FHU)
FHS = FULL HOT STAND: if reading the dipstick with the bike on the jiffy stand you will take your reading from the dimples labeled FHS (Full Hot Stand)
FHU = FULL HOT UPRIGHT: when reading the dipstick with the bike upright and level you will take the reading from the dimples labeled FHU (Full Hot Upright)
Fade-resistant black finish
Made in the U.S.A.
Fits:
2017 - 2020 Harley-Davidson CVO Electra Glide Ultra Limited FLHTKSE
2018 - 2020 Harley-Davidson CVO Road Glide Custom FLTRXSE
2017 - 2020 Harley-Davidson CVO Street Glide FLHXSE
2020 Harley-Davidson CVO Tri Glide
2017 - 2020 Harley-Davidson Electra Glide Police FLHTPI
2019 - 2020 Harley-Davidson Electra Glide Standard EFI FLHTI
2017 - 2019 Harley-Davidson Electra Glide Ultra Classic EFI FLHTCUI
2017 - 2020 Harley-Davidson Electra Glide Ultra Limited FLHTK
2017 - 2019 Harley-Davidson Electra Glide Ultra Limited Low FLHTKL
2017 - 2020 Harley-Davidson Freewheeler FLRT
2017 - 2020 Harley-Davidson Road Glide Custom FLTRX
2020 Harley-Davidson Road Glide Limited FLTRK
2017 - 2020 Harley-Davidson Road Glide Special FLTRXS
2017 - 2019 Harley-Davidson Road Glide Ultra FLTRU
2017 - 2020 Harley-Davidson Road King EFI FLHR
2017 - 2020 Harley-Davidson Road King Special FLHRXS
2017 - 2020 Harley-Davidson Street Glide EFI FLHX
2017 - 2020 Harley-Davidson Street Glide Special FLHXS
2017 - 2020 Harley-Davidson Tri Glide Ultra Classic FLHTCUTG
NOTE: These dipsticks do get hot; use a glove when checking oil level.
NOTE: Feuling highly recommends staying off the rev limiter and running conventional oil in the M-Eight engines to help maintain ring seal and minimize blow by.
NOTE: It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot.
NOTE: The oil pick up port is on the right side of the engine. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank.
Feuling part number 3088
Drag Specialties part number 0710-0260
094960
